SYNTHETIC FILAMENTS

PVC

PVC monofilaments (polyvinyl chloride) can be used to manufacture brooms and brushes used for cleaning. 

POLYPROPILENE AND POLYETHYLENE

Due to their intrinsic properties, Polypropylene fibres can be used in any product requiring good hardwearing  and a low density value, such as in the industrial brushing and road sweeping sectors, but also in the household brush sector, thanks to their excellent behaviour at high temperatures. 

Polyethylene is the polymeric material with the simplest chemical structure. Its lightness, softness and low bend resistance make PE interesting in applications where there is no need for “consistency”, stiffness or resistance to stress. PE fibres are mainly used in soft brushes for special industrial applications such as the large brushes in carwashes or roller brushes for fruit/vegetable treatment and so on.

SOLID AND HOLLOW POLYESTER

Polyester monofilaments are mainly used to produce brooms and brushes when it is necessary to give prevalence to particular specifications such as good resistance to high temperatures, flaggability and softness in thinner diameters. Thanks to its resistance to wear and abrasion, Polyester is also used for the production of industrial brushes and paintbrushes as an alternative to other materials such as Nylon or natural fibres. Two main qualities of Polyester are used in the brush industry:

  • PET (polyethylene terephtalate)

  • PBT (polybuthylene terephtalate) mainly used for tooth and hygienic brushes as PBT matches the HACCP (analysis critical control points) guide lines edited by FDA in USA

NYLON

Nylon 6 is used in many cleaning products and industrial applications. Its specifications and the ease with which Nylon is processed make it competitive in the production of many kind of brushes.

Nylon 66 filaments have higher specifications, especially as regards resistance to wear and abrasion, and bend recovery. Nylon is used to produce  industrial brushes, paintbrushes, brushes for personal hygiene, etc.

Filaments in Nylon 610/612 feature the highest specifications, especially thanks to their excellent bend recovery and abrasion resistance. They also feature limited water absorption, which affects their elastic properties. For this reason, they are used in toothbrushes, paintbrushes, make-up brushes and various industrial applications.

ABRASIVE FILAMENTS

Extruded monofilaments in Nylon and other polymers  loaded with Silicon Carbide (SiC), Aluminium Oxide (AO) Ceramics (KK) and Diamond (DIA). A wide range of grit sizes are available starting from grit 1000 to 36.

Multifil® range: recently introduced, Multifil® filaments can be abrasive and not.

Filaments can be supplied also cut to requested lengths.

Mainly used for: deburring, cleaning, polishing finishing for steel or stone, aluminium, porcelain, wood, hard metal etc, floor care and textile processing.

SPECIAL MONOFILAMENTS FOR TOOTHBRUSHES

Monofilaments tapered and not for toothbrushes production, KREX ® Gemini (coextruded tapered filament); KREX® Dual Action ( one side tapered and  one side rounded filament), KREX® charcoal loaded.

Different kind of filaments in line with the continuous evolution of the market.

 

®KREX is a registered trademark of the company K.R. Filament CO.LTD – Thailand

SPECIAL FILAMENTS FOR PAINT AND COSMETIC BRUSHES 

KREX® filaments , chemically tapered  filaments , specially suitable for the production of paint , cosmetic and artist brushes.

KREX® is available also in Gemini version , coextruded tapered filament with tip and body in two different colours

 

®KREX is a registered trademark of the company K.R. Filament CO.LTD - Thailand

Pogliani Srl - Via Volta, 7/A - 23845 Costamasnaga (LC) - Tel. 031 856 986 - Fax: 031 856 273

E-mail: info@poglianisrl.com - www.poglianisrl.com - Cod. Fisc. 05930460158 - P. Iva 01961130133

Privacy Policy                           Informativa Form